Agilent Technologies Agilent E6474A - Manual (Page 90)

90 Agilent E6474A User’s Guide
4 Use Your System
Adding a data device
Use the data port in the System Setup view to set up the device
and data properties. In the System Setup view, up to four
devices can be added to the data port. Properties for the data
device can then be configured, in a manner similar to a phone.
To add a device to the data port:
1 Right-click on the Data Port. A pop-up menu appears, as
shown in Figure 44 .
Figure 44 Adding a data device
2 Choose Add Device from the pop-up menu. After you add the
data device, it is enabled, as indicated by the check mark
next to Data Device in
Figure 45 on page 91.