About this guide – Agilent Technologies Agilent E6474A User Manual
Page 3
Agilent E6474A User’s Guide
3
Welcome to Agilent E6474A Wireless Network Optimization Platform
Thank you for choosing Agilent Technologies. In this User’s
Guide, you will find the instructions you need to setup the
hardware and begin using the software to take measurements.
About this guide
This guide contains installation and operating instructions for
the Agilent E6474A Wireless Network Optimization Platform
software, as well as instructions for using the Agilent E6473B
High Speed Direct Connect Hub.
See this chapter
For this information
1 Get Ready
A list of tasks to perform before you get started.
2 Install the Software
Instructions for Installing the E6474A software.
3 Set Up Your System
Setup instructions and cable connections for each
component of your systems.
4 Use Your System
• Powering up systems.
• Starting the software.
5 Get Results Fast
• Using the Quick Basics to get started learning to
use the E6474A.
• Accessing and using online help.
6 Get Assistance, If You
Need It
• Getting telephone support.
• Frequently asked questions.
• Returning systems for service.
• Solving problems.
• Contacting customer support.
• Updating E645xx receiver firmware.
Information to help you to use your system safely
“Connection Panels
and LED Indicators”
A quick reference for the panel connectors and LED
indicators of the E6473B High Speed Direct Connect
Hub, E645x receiver, the GPS/DR Navigation unit,
and the Trimble Placer 455DR.