Agilent Technologies Agilent E6474A - Manual (Page 71)

Set Up Your System 3
Agilent E6474A User’s Guide 71
Adjusting the backpack harness
1 Loosen all straps and place the pack on your back as shown
in Figure 36 .
2 Fasten the waist belt and tighten it so that it rests on your
hips. The waist belt should always remain on your hips, even
after the harness is adjusted.
3 Tighten up the shoulder straps until the pack feels
comfortable. The weight of the pack should be carried on
your hips for maximum comfort. The shoulder straps help
stabilize the pack on your body.
4 Connect the chest strap. You can change the vertical position
so that the strap fits comfortably across your chest. The
sternum strap reduces shoulder fatigue and increases
mobility by pulling the shoulder straps inward.
Figure 36 Tightening the shoulder straps on the backpack