Agilent Technologies Agilent E6474A - Manual (Page 77)

Use Your System 4
Agilent E6474A User’s Guide 77
Starting the software
Detailed information about the software is available from the
online help. It is assumed that the software has already been
installed. If not, refer to
“Install the E6474A software." on
page 17 for installation instructions.
To start the software
1 To start the software, click Start > Programs > Agilent
Wireless Solutions > E6474A > E6474A. Refer to Figure 38 .
Figure 38 Starting E6474A software
2 When the software starts, a copyright screen (Refer to
Figure 39 ) is briefly displayed. If you have used the software
before, the last used project will automatically open.
Figure 39 Copyright screen