Agilent Technologies Agilent E6474A - Manual (Page 37)

Set Up Your System 3
Agilent E6474A User’s Guide 37
Phone connection using PCMCIA (PC Card)
To extend your laptop serial port capability you can use a
dual-port serial PCMCIA (PC-card) I/O card. Refer to
Figure 10
on page 37.
Refer to the PCMCIA manufacturer instructions before
installing this device.
Figure 10 Connecting a phone using a PCMCIA card
Phone connection using the E6473B hub
The E6473B hub provides two ports for connecting phones.
Each port provides a voice and data capability while charging
the attached phone.
NOTE
To use the two phone ports on the front of the E6473B hub you have to use
a special cable. Refer to the list of supported phones to see if a cable
exists for your phone.
To access this list open the E6474A software and select Help > Library.