Reese 56011 OUTBOARD CUSTOM QUICK INSTALL KIT - Manual

© 2013 Cequent Performance Products, Inc.
Rev. B 56011N 7/10/13
ITEM DESCRIPTION QUANTITY ITEM DESCRIPTION QUANTITY
1 STRAP FRONT (1.500" WIDE) 2 7 CABLE TIE 8.500" 1
2 DRIVER SIDE BRACKET 1 8 BUSHING 2.937" 4
3 PASSAGER SIDE BRACKET 1 9 BUSHING REAR 2.60" BLACK 4
4 LOCKWASHER 1/2" PLATED 8 10 STRAP REAR (2.000" WIDE) 2
5 BOLT, CARRIAGE 1/2"-13X4.500" GR8 10 11 BUSHING 2.773" 2
6 NUT, HEX 1/2"-13 GRADE 8 8
Vehicle Forward
1
Figure 1
Installation Instructions
REESE ® CUSTOM QUICK INSTALL MOUNTING KIT
FOR 30153 REESE ® RAILS ONLY
2003 - 2013 Dodge Ram 2500
Part Number:
56011
WARNING:
Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
REESE ® Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame.
10 BOLT INSTALLATION
All Fasteners
Typical Both Sides
All of the fasteners listed to
the left are supplied with this
kit, all other mentioned
fasteners are supplied with
part number 30153.
1
2
3
4 6
5
5
9
8
10
11
7
Ground wire holes
Equipment Required:
Fastener Kit: 56011F
Wrenches: 3/4”, 10mm
Drill Bits: 1/8”, 9/16” & 1 1/4” Hole saw
Other Tools: Center Punch, Measuring Tape
& Reciprocating Saw (for 6’ bed)