Alamo Machete T 7740 - Manual (Page 83)

© 2005 Alamo Group Inc. 2-25
MACHETE
SERVICE BULLETIN No. 000510
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Valve Pressure Filter Kit:
Subject:
A new filter kit P/N 02976069 has been developed and must be installed to help prevent some
contamination failures of the control valve system due to normal gear and brake wear within the
tractor hydraulic system. This new filter system has an indicator that will show when the filter
is plugged, see Technical Information Bulletin 032200 for more detail.
Service Required: Use the instructions provided with each kit to install the filter onto the control valve.
Parts Required: Order Pressure Filter Kit P/N 02976069 which includes,
Part No. Qty Description
02975187 1 Elbow
02976066 1 Filter Assembly
02976068 1 Instruction Sheet
02976076 1 Elbow
Above part are include in Kit P/N 02976069
Note: The new filter will mount on the Inlet
(pressure) side of the control valve which
is mounted on the right hand frame rail. The
hardware (Elbows) and instruction sheet are
included. Read these prior to beginning any
repairs or modifications. Always refer to
operators manual for safe procedures when
working around equipment.
Models: Machete Boom
S/N MB21-01360 to 01458
S/N MB24-01190 & 01209
Date:
Oct. 5, 2000
Bulletin No:
000510
(Old # 200006)
Parts:
100 % at Dealer Net
Labor:
0.5 hrs. at Dealer registered
Shop Rate
Termination Date:
Dec 15, 2000
Old Parts Disposition:
No Returnable Parts
involved
Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.
Visual Indicater - Bypass
Filter Head
O-Ring
O-Ring
Filter Element
O-Ring
Back Up Ring
Filter Bow
l
Figure 1