Alamo Machete T 7740 User Manual
Page 76
© 2005 Alamo Group Inc.
2-18
MACHETE
SERVICE BULLETIN No. 970108
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Blade Bolt Inspection / Recall:
Subject:
The Blade Bolt Nut Retaining Roll Pin Bore may be oversized and could allow the roll pin to
become loose in the bore. The loose roll pin could therfore allow the blade bolt Nut to loose
torque.
Service Required:
1.
Visually inspect and check the fit of the roll pin. If it is loose or has come loose replace the Blade
Bolt, Blade Bolt Nut and Roll Pin on the above listed serial numbered units.
2.
Torque the Blade Bolt to 600 ft. lbs. before installing the new Roll Pin.
Parts Required:
Part No.
Qty
Description
02782900
2
Blade Bolt
00020900
2
Nut
00023200
2
Roll Pin
Models:
Machete Boom
MR 60" Rotary Heads S/N 01039 & Up
Date:
Aug. 1, 1997
Bulletin No:
970108
(Old # 970009A)
Parts:
100 % at Dealer Net
Labor:
1.0 hrs. at Dealer registered
Shop Rate
Termination Date:
Aug. 31, 1997
Old Parts Disposition:
Scrap Old Parts
Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.
Figure 1