Alamo Machete T 7740 User Manual

Page 14

1-8

MACHETE

Corrective Action:

Using needle nosed pliers, push the B and C connectors out of the back of the plug and

reinstall them in the opposite positions, or cut the two wires to the B and C connectors and splice
them back together reversing them.

TECHNICAL INFORMATION BULLETIN No. 010896

Alamo Industrial ™ Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models:

All Machete Boom Mowers

Date:

Jan. 8, 1996

Bulletin No:

010896

This document does not authorize the repair or replacement of parts under warranty

Trouble shooting improper operation of motor starting circuit:

The correct operation of the motor is for the operator to pull out the Main Motor Switch and

then momentarily press the Motor Start Button. the Motor will advance to full operating speed and will
continue to run while the Main Motor Switch is in the OUT position.

If the harness is wired wrong, the motor will start as soon as the Motor Start Switch is pulled

out without pressing the Motor Start Button.

The above illustration is the female connector of the motor wire harness

Hold

Circuit

Pull

Circuit