Alamo Machete T 7740 User Manual

Page 66

2-8

MACHETE

SERVICE BULLETIN No. 962503-2

Alamo Industrial Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Lower Crossmember Kit Installation:

Subject:

Install lower frame rail crossmember kit to reduce frame rail deflection and movement.

Service Required:

Install Crossmember between frame rails under tractor and aligned with the upright section of
frame rails as shown in figure 1.

Using large C-Clamps clamp the crossmember uprigts to the frame rails. The bolts in the
crossmember will need to be loose when you do this, the holes for these bolts are slotted.

Weld the uprights of the cross member to the upright of the frame rail on both sides. retighten the
bolts in cross member. Cleand welded are and repaint welded are and crossmember. 2 Cans
Spay Paint, High Gloss Black (Obtain Locally)

Parts Required:

Part No.

Qty

Description

02970118

Frame Rail Support Kit

Models:

Machete Boom Mowers

S/N MB21-01001 to 01015 (& PT002)
S/N MB24-01001 to 01012 (& PT002)

Date:

Mar. 25, 1996

Bulletin No:
962503-2
(Old # 960002)

Parts:

100 % at Dealer Net

Labor:

2.0 hr. at Dealer registered
Shop Rate

Termination Date:

Oct. 1, 1996

Old Parts Disposition:

No Returnable Parts
involved

Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.

Frame Rail Support Kit

P/N 02970118

Frame Rail, RH Shown

Weld Here both side and

both frame rails

Figure 1