PASCO OS-8500 INTRODUCTORY OPTICS SYSTEM - Manual (Page 4)

Introductory Optics System 012-02744K
®
Please—Feel free to duplicate this manual
subject to the copyright restrictions below.
Copyright, Warranty and Equipment Return
Copyright Notice
The PASCO scientific Model OS-8500 Introductory
Optics System manual is copyrighted and all rights
reserved. However, permission is granted to non-
profit educational institutions for reproduction of any
part of this manual providing the reproductions are
used only for their laboratories and are not sold for
profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is
prohibited.
Limited Warranty
PASCO scientific warrants this product to be free
from defects in materials and workmanship for a
period of one year from the date of shipment to the
customer. PASCO will repair or replace, at its option,
any part of the product which is deemed to be defec-
tive in material or workmanship. This warranty does
not cover damage to the product caused by abuse or
improper use. Determination of whether a product
failure is the result of a manufacturing defect or
improper use by the customer shall be made solely by
PASCO scientific. Responsibility for the return of
equipment for warranty repair belongs to the cus-
tomer. Equipment must be properly packed to
prevent damage and shipped postage or freight
prepaid. (Damage caused by improper packing of the
equipment for return shipment will not be covered by
the warranty.) Shipping costs for returning the
equipment, after repair, will be paid by PASCO
scientific.
Equipment Return
Should this product have to be returned to PASCO
scientific, for whatever reason, notify PASCO scien-
tific by letter or phone BEFORE returning the product.
Upon notification, the return authorization and
shipping instructions will be promptly issued.
➤ ➤ ➤ ➤ ➤NOTE: NO EQUIPMENT WILL BE AC-
CEPTED FOR RETURN WITHOUT AN
AUTHORIZATION.
When returning equipment for repair, the units must
be packed properly. Carriers will not accept responsi-
bility for damage caused by improper packing. To be
certain the unit will not be damaged in shipment,
observe the following rules:
➀
The carton must be strong enough for the item
shipped.
➁
Make certain there is at least two inches of packing
material between any point on the apparatus and
the inside walls of the carton.
➂
Make certain that the packing material can not shift
in the box, or become compressed, thus letting the
instrument come in contact with the edge of the
box.
Address: PASCO scientific
10101 Foothills Blvd.
P.O. Box 619011
Roseville, CA 95678-9011
Phone: (916) 786-3800
FAX: (916) 786-8905
ii
Credits
This manual authored by: Ed Pitkin
This manual edited by: Dave Griffith
Teacher's guide written by: Eric Ayars