PASCO SPARK Science Learning System User's Guide - Manual (Page 64)

56 S AVING AND SHARING
P RINTING A LAB
Printing a lab
The SPARKlab cannot be printed directly; however, you can capture SPARKlab
pages in the journal and print the journal
You will need a compatible USB printer. Most USB inkjet printers
manufactured by HP are compatible with SPARK.
Complete these steps to take snapshots of SPARKlab pages and print the
snapshots:
1. On each SPARKlab page that you wish to print, touch the Snapshot
button.
Each time you touch the Snapshot button, the Snapshot Quick View appears
briefly and an image of the page is added to the journal.
2. Connect a printer to USB port of the SPARK.
3. Touch the Sharing button to open the Sharing screen.
4. Touch the JOURNAL tab.
5. Touch PRINT JOURNAL to open the journal print page.
6. Touch OK.
The journal is printed, and the SPARK returns to the Sharing screen.
7. Touch Done to return to your SPARKlab.
Exporting data
To export data, you will need a USB flash drive (or other USB storage device).
The data that you have collected will be saved on the flash drive in a tab-
delimited text file that can be opened on a computer.
Note that exporting data is not equivalent to saving the lab. If you plan to later
reopen your work on the SPARK, you must also save the lab.
Complete these steps to export data:
1. Connect a flash drive to USB port of the SPARK.
2. Touch the Sharing button to open the Sharing screen.