PASCO SPARK Science Learning System User's Guide - Manual (Page 59)

B UILDING SPARK LAB PAGES 51
A DDING A DISPLAY TO A SPARK LAB PAGE
Adding a display to a SPARKlab page
In the Page-build screen, complete one or more of the following tasks to add
displays.
Adding a graph
Complete these steps in the Page-build screen:
1. Touch one or two measurements (or other variables) to select them.
If you select just one measurement, it will be plotted on the y-axis with time
on the x-axis. If you select two measurements, the first selected will be plotted
on the y-axis, and the second selected will be plotted on the x-axis.
2. Touch the Graph button.
A graph is added to the preview.
If you have finished adding elements to the page, touch OK to exit the Page-
build screen.
Adding a table
Complete these steps in the Page-build screen:
1. Touch one or more measurements or other variables (up to six) to select
them.
2. Touch the Table button.
A table is added to the preview.
If you have finished adding elements to the page, touch OK to exit the page-
build screen.
Adding a digits display
Complete these steps in the Page-build screen:
1. Touch one measurement or other variable to select it.