PASCO SPARK Science Learning System User's Guide - Manual (Page 54)

46 C ALCULATIONS AND MANUALLY ENTERED DATA
E NTERING DATA MANUALLY
2. Touch the Measurement Name: box and enter a name for the new
data set.
3. Optionally, touch the box and enter the name of the units.
4. Touch OK.
Creating a data set for manually entered text
1. In the measurement list under User-entered Text Data, touch Create
Data Set.
The Define the Data Set screen opens.
2. Touch the Measurement Name: box and enter a name for the new
data set.
3. Touch OK.
Preparing a table for manual data entry
After you have completed the previous task, the SPARK returns either to the
Page-build screen or to the Table Properties screen. Depending on which screen
you see, do one of the following:
• If the Table Properties screen is open, touch OK.
The table appears displaying the empty data set ready for data entry.
• If the Page-build screen is open, build a page containing the empty
data set displayed in a table:
a. In the measurement list, touch the data set that you just created to
select it.
b. Touch the Table button.
c. Touch OK.
A new table appears displaying the empty data set ready for data entry.