PASCO SPARK Science Learning System User's Guide - Manual (Page 14)

6 S TARTING AN EXPERIMENT
M OVING ON FROM THE H OME SCREEN
7. Touch OK.
The SPARKlab opens.
Follow the on-screen instructions to continue your science investigation. Touch
the Page Navigator to turn pages.
Showing a SPARKlab
A show-path SPARKlab is the fastest way to record data and display it in a
graph, table, digits display, and meter. Complete these steps to show a
SPARKlab:
1. Connect a sensor.
2. In the Home screen, touch the measurement that you would like to
show.
The selected measurement is highlighted.
3. Touch Show.
A measurement must be selected for Show to be available.
A four-page SPARKlab opens.
Touch the Start button to record data.
Touch the Page Navigator to see your data in the different displays.
Building a SPARKlab
When you build a custom SPARKlab, you design each page with your choice of
measurements and displays. You can also add text and pictures. Complete these
steps to start building a SPARKlab:
1. Connect a sensor (or sensors).
2. In the Home screen, touch Build.
The Page-build screen opens.