6wellmea, Connector 1, Connector 3 – Multichannel Systems MEA Manual User Manual
Page 108: Connector 4 connector 2
6-Well Microelectrode Array for
use with USB-MEA256-System.
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2014 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
256-6wellMEA
256-6wellMEA200/30iR-ITO-rcr
256-6wellMEA200/30iR-ITO-tcr
Technical Specifications 256-6wellMEA
Temperature compatibility
0 - 125 °C
Dimension (W x D x H)
49 mm x 49 mm x 1 mm
Base
material
Glass
Contact pads and track material
Titanium nitride (TiN) and Titanium (Ti)
Electrode
diameter
30
μm
Interelectrode distance (centre to centre)
200 μm
Electrode
height
Planar
Electrode
type
Titanium
nitride
(TiN)
Isolation
type
Silicon
nitride
(SiN)
Electrode
impedance
30
-
50
k
Electrode layout grid
6 x (7 x 6) electrodes
Number of recording electrodes
252 (42 recording electrodes in each well)
Number of reference electrodes
6, one internal reference electrode (iR) around each well
Contact pads for reference electrodes
4, the reference electrodes are connected to 2 pads only
(connected to ground)
Source layout in “Data Source Setup”
Configuration
Channel
map
256-6wellMEA.cmp
MEA perfusion chamber
(tcr)
Triangle chamber ring with 6 wells
OD
30
mm,
ID
27
mm,
height
10
mm
of
each
well.
Volumetric
capacity
of
each
well:
minimum
700
μl.
(rcr)
Round
chamber
ring
with
6
wells:
OD 30 mm, ID of the wells 7 mm, height 10 mm of each well.
Volumetric
capacity
of
each
well:
minimum
500
μl.
The MEA is not symmetrical
and has to be inserted into
the amplifier with well A on
top as shown in the picture.
2
1
64
63
Connector 1
2
1
64
63
Connector 3
1 2
63 64
1
2
63
64
Connector 4
Connector 2
A
B
C
D
E
F