Analog Devices EZ-KIT Lite ADSP-21364 - Manual (Page 12)

Purpose of This Manual
xii ADSP-21364 EZ-KIT Lite Evaluation System Manual
information, see “External Memory” on page 1-7 and “Boot Mode and
Clock Ratio Select Switch (SW10)” on page 2-12 . The board also has
512 KB of SRAM, which can be used at runtime.
The DAI of the processor connects to the AD1835A audio codec and two
connectors, which allow Sony/Philips Digital Interface (S/PDIF) input
and output. The interface facilitates development of digital and analog
audio signal-processing applications. See
“Analog Audio” on page 1-8 and
“S/PDIF Coax Connectors (J8 and J9)” on page 2-18 for more
information.
Additionally, the EZ-KIT Lite board provides access to all of the proces-
sor’s peripheral ports. Access is provided in the form of a three-connector
expansion interface. See
“Expansion Interface” on page 2-7 for details.
Purpose of This Manual
The ADSP-21364 EZ-KIT Lite Evaluation System Manual provides
instructions for installing the product hardware (board) and describes the
operation and configuration of the board components. The product soft-
ware component is detailed in the VisualDSP++ Installation Quick
Reference Card. The manual provides guidelines for running your own
code on the ADSP-21364 EZ-KIT Lite. Finally, a schematic and a bill of
materials are provided as a reference for future designs.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set. Programmers who are unfamiliar with Analog Devices
processors can use this manual but should supplement it with other texts