Luminex xPONENT 3.1 Rev 2 - Manual (Page 86)

LIS Settings
This setting is only for those using xPONENT ® with a Lab Information System (LIS).
Connect to LIS - Enables connection the LIS.
Browse - Opens the Browse for Folder dialog box. Select a location for the system to watch
for incoming orders.
External Analysis Program Settings
This option is for those using a program other than xPONENT to analyze collected data.
Installed Analysis Programs - Lists the analysis programs currently installed.
Add New - Opens the New External Analysis Program dialog box.
FIGURE 42. New External Analysis Program Dialog Box
Browse - Opens another dialog box to select the file location for the third-party analysis
program. The selected location appears in the Path box, and the name displays in the Name
box.
Command Line Parameters - Type the command line parameter for what parameters you
want xPONENT to use with the external analysis program. If the information is supplied with
the external analysis program documentation, use that information. Otherwise, you can type
the following parameters built into xPONENT, in any order:
• #c - Output.csv, full file path
• #p - Protocol name
• #b - Batch name
• #u - Logged in user name
To keep the default command line settings, leave Command Line Parameters blank.
Set Default - Sets the chosen analysis program as the default analysis program for
xPONENT.
OK - Saves the chosen settings and exists the dialog box.
Cancel - Cancels changes and exists the dialog box.
Remove - Removes the selected program from the Installed Analysis Programs list.
Edit - Opens the New External Analysis Program dialog box where you can edit the
settings for the selected program.
Touring the Software
73