Luminex xPONENT 3.1 Rev 2 - Manual (Page 15)

The conventions in this document assume a basic familiarity with computers and a
knowledge of Microsoft
® Windows ® software. Commands are often available through more
than one method, such as from the toolbar and from menus that appear when right-clicking
an area of the screen. However, for ease of use the individual procedures in this manual
describe only one method for accessing commands.
This guide is formatted as a PDF, and can be printed. However, the guide is best viewed
online due to the bookmarks and hypertext included in the text.
This guide may be updated periodically. To ensure that you have a current version, access
http://www.luminexcorp.com/Downloads/index.htm . The most recent version of this guide, as
well as all translations of this guide, are available for download at that URL.
Warnings, Notes and Symbols
The following informational notes and warnings are used in this manual.
NOTE: This message is used to provide general helpful information.
CAUTION: This message is used in cases where the hazard is minor or only
a potential hazard is present. Failure to comply with the caution
may result in hazardous conditions.
WARNING: This message is used in cases where danger to the operator or
to the performance of the instrument is present. Failure to
comply with the warning may result in incorrect performance,
instrument failure, invalid results, or hazard to the operator.
You may encounter these symbols during the use of xPONENT software. They represent
warnings, conditions, identifications, instructions, and regulatory agencies.
TABLE 1. Symbols
Warning, Biological Hazard Heat/Hot, Surface Warning
General Warning, Caution,
Risk of Danger
Manufacturer
Reference Manual
European Representative
General Guidelines
Modifying or deleting xPONENT ® system files may cause degradation to system
performance. You can repair modified or deleted xPONENT system files by uninstalling and
re-installing the xPONENT software.
xPONENT ® 3.1 Rev. 2
2