Luminex xPONENT 3.1 Rev 2 - Manual (Page 69)

Off Plate Area - Designates an alternate location for maintenance commands in the
Commands: list. Highlight a command, and then click the reservoir in the Off Plate Area as
the location for the command.
Cancel - Returns to the main Protocols tab without saving.
Back - Returns to the Analytes tab.
Save - Saves the protocol and returns to the main Protocols tab.
Stds & Ctrls Tab
Use this tab to delete, edit, export, import, and create standards and controls.
FIGURE 31. Stds & Ctrls Tab
This tab contains the following:
Create New Std/Ctrl Lots - Opens the Std/Ctrl Details tab to create a new lot or kit. For
more information, see Std/Ctrl Details Tab section.
Installed Kits And Lots - Displays information about the kits and lots currently installed on
the system.
• Show - Click either Std/Ctrl Kits Only or All Lots to choose what to display.
• Group lots from the same Std/Ctrl Kit together - Select to group lots from the same kit
together.
Select All Lots in the Show selections to display the following information about each
installed lot:
xPONENT ® 3.1 Rev. 2
56