Luminex xPONENT 3.1 Rev 2 - Manual (Page 144)

1. From within the xPONENT 3.1 program, click the Protocols tab from the tab bar at the
top of the window, click the Protocols tab on the left side of the window, then click the
Import button.
FIGURE 68. Protocols Tabs
2. Navigate to the folder containing the newly-converted protocol (.lxt file) then click to
select the file and click the Open button.
FIGURE 69. New Protocol
3. Once the import has succeeded, the new protocol is shown in the Installed Protocols
list. Click the OK button on the Import Protocol File dialog box.
Converting IS 2.3 .idt Files to xPONENT 3.1 .lxt Files
131