Luminex xPONENT 3.1 - Manual (Page 51)

39
Touring the Software
FIGURE 21. Filter Setup Dialog Box
This dialog box lets you choose the saved batches you want to display in the Completed
Batches list based on options you select or clear in the following check boxes:
• Batch Name
• Protocol
• Batch Status
• Lot ID
• Kit ID
• Analyte
• Sample ID
• First Name
• Last Name
• User ID
• Date
Reset - Clears all check boxes.
OK - Closes the dialog box and applies any changes you made.
Cancel - Closes the dialog box and cancels any changes you made.
Save Prtcl. Saves the protocol and kit information for the selected batch. For more
information, see Figure 11 on page 23.
Approve. Opens the Batch Approval Confirmation dialog box to approve the selected
batch. Only approved batches can be transmitted to the LIS. If your software is licensed
for LIS use, you can transmit batches to the LIS from the Sample Results tab. Once you
have approved a batch, the status of the batch changes to Approved in the Completed
Batches list.