Luminex xPONENT 3.1 - Manual (Page 30)

Luminex xPONENT 3.1 Software Manual
18
Create a New Batch from an existing Protocol
Creates a new batch from an existing protocol. The Protocol tab opens.
Protocol Tab
Use this tab to name a batch, type a description, select a protocol, and view active
reagents.
FIGURE 8. Protocol Tab
This tab contains the following:
Batch Name/Description. Used to name and describe a batch.
Select a Protocol. Contains the protocol name, version, manufacturer, and creation date
for each protocol.
Active Reagents. Displays assay and control lots/kits associated with the selected
protocol. The Standard/Ctrls Kit Name - Lot# field displays the assay standard/control
kit/lot name and lot number currently associated with the selected protocol. The Standard
Lots and Controls Lots fields display any standard or control lots associated with the
selected protocol.
Cancel. Returns to the main Batches tab.
Next. If you have selected a protocol with no standards or controls (Displayed as None in
the Active Reagents section), clicking Next continues to the Plate Layout tab. If you
have selected a protocol with standards and controls, clicking Next continues to the Stds
& Ctrls tab.