Agilent Technologies E1300B - Manual (Page 205)

SCPI Commands Quick Reference
Command Description
SYSTem
:BEEPer
[:IMMediate] Sound beeper (fixed duration and tone).
:CO MMunicate
:G PIB
:AD D Ress Sets the primary address of the communications port.
:AD D Ress? Returns G PIB address or min| max allowed value.
:SERial[n]
:CO NTrol
:D TR O N| O FF| STANdard| IBFull Sets mode for modem control line D TR.
:D TR? Returns current mode of D TR line.
:RTS O N| O FF| STANdard| IBFull Sets mode for modem control line RTS.
:RTS? Returns current mode of RTS line.
[:RECeive]
:BAU D < baud_rate> | MIN| MAX Sets transmit and receive baud rate of serial interface.
:BAU D ? [MIN| MAX] Returns the current or allowable baud setting.
:BITS 7| 8| MIN| MAX Sets the number of data bits in the serial data frame.
:BITS? [MIN| MAX] Returns the current or allowable BITS setting.
:PACE
[:PRO Tocol] XO N| NO NE Sets the receive pacing protocol to XO N/XO FF or none.
[:PRO Tocol]? Returns the state of receive pacing protocol.
:TH Reshold
:STARt < char_count> Sets the input buffer start threshold for input pacing.
:STARt? [MIN| MAX] Returns current or allowable STARt threshold level.
:STO P < char_count> Sets the input buffer stop threshold for input pacing.
:STO P? [MIN| MAX] Returns the current or allowable STO P threshold level.
:PARity
:CH ECk 1| 0| O N| O FF Enables/disables receive parity checking.
:CH ECk? Returns the current state of receive parity checking.
[:TYPe] EVEN| O D D | Z ERO |
O NE| NO NE
Sets the type of receive and transmit parity.
[:TYPe]? Returns the current parity type setting.
:SBITs 1| 2| MIN| MAX Sets the number of stop bits for receive and transmit.
:SBITs? MIN| MAX Returns the number of stop bits set.
:TRANsmit Note: Agilent E1324A is always
…
TRAN:AU TO O N
:AU TO 1| 0| O N| O FF Links/unlinks the transmit and receive pacing protocol.
:AU TO ? Returns the current transmit/receive pacing linkage.
:PACE
[:PRO Tocol] XO N| NO NE Sets the transmit pacing protocol to XO N/XO FF or none.
[:PRO Tocol]? Returns the state of transmit pacing protocol.
:D ATE < year> ,< month> ,< day> Sets system calendar.
:D ATE? [MIN| MAX,MIN| MAX,MIN| MAX] Returns current date or min| max allowable values.
:ERRor? Returns oldest error message in Error Q ueue.
:TIME < hour> ,< minute> ,< second> Sets the system clock.
:TIME? [MIN| MAX,MIN| MAX,MIN| MAX] Returns current time or min| max allowable values.
:VERSion? Returns SCPI version for which this istrument complies.
System Instrument
Command Quick Reference 7–77