Agilent Technologies E1300B - Manual (Page 204)

SCPI Commands Quick Reference
Command Description
:NRAM
:AD D Ress? Returns starting address of the U ser non-volatile RAM.
:CREate < size> | MIN| MAX Creates a U ser non-volatile RAM segment.
:CREate? [MIN| MAX] Returns the current or allowable size of U ser NVRAM.
:PEEK? < address> | MIN| MAX,< width> Returns an 8, 16, or 32 bit value from memory.
:PO KE < address> | MIN| MAX,< width> ,< data> Stores an 8, 16, or 32 bit value to RAM.
:RD ISk
:AD D Ress? Returns the starting address of an IBASIC RAM volume.
:CREate < size> | MIN| MAX Allocates RAM for an IBASIC RAM volume.
:CREate? [MIN| MAX] Returns the current or allowable size of the RAM vol.
:U PLoad
[:MAD D ress]? < address> ,< byte_count> Returns data from non-volatile user RAM starting at address.
:SAD D ress? < address> , < byte_count> Returns data from non-volatile user RAM at address.
INITiate
[:Immediate] Enables trigger system to start Pacer.
[SO U Rce]
:PU LSe
CO U Nt < numberic value> Sets number of Pacer pulses per trigger.
CO U Nt? [MIN| MAX] Returns current count, or MIN| MAX allowed value.
:PERiod < numeric value Sets Pacer pulse period in seconds.
:PERiod? [MIN\ MAX] Returns the current or allowable period value.
STATus
:O PERation
:CO ND ition? Returns the state of the condition register.
:ENABle 256 Set Standard O peration Enable Register mask.
:ENABle? Returns value of enable mask.
[:EVENt]? Returns value of the bit set in the Event register (Standard O peration
Status G roup).
:PRESet Presets status registers
:Q U EStionable
:CO ND ition? Always returns + 0.
:ENABle < mask> Set Q uestionable Status Register enable mask.
:ENABle? Returns value of enable mask.
[:EVENt]? Always returns + 0.
System Instrument
7–76 Command Quick Reference