Controlled Products Systems Group PATRSL - Manual (Page 32)

30
Accessory Wiring Information
USAutomatic Patriot gate operators are 12 vdc powered, solar charged operators do not require 110-vac for
proper operation. Accessories that operate at 12 vdc can be connected directly to the control board or the
battery. Proper accessory selection must be made so that the accessories installed do not drain the solar
charged operator battery.
If accessories selected operate at 110-vac then it will be necessary to have 110-vac power located at the operator
control box. Refer to local building codes and have a qualified electrician install the 110-vac power.
Types of Accessories
USAutomatic Patriot control boards are designed to operate with all accessories. Understanding the control
board inputs and the desired operation of each accessory is essential when designing the gate operator system.
Safety Accessories
(Primarily used to keep gate from operating when an object is in the gate path)
Safety Loops –
Photo Eyes –
Motion Detector –
Secondary Entrapment Accessories
(Primarily used to protect objects from becoming trapped in and around the gate area)
Contact Edge (wireless) –
Contact Edge (wired) –
Photo Eyes –
Convenience Accessories
Keypads –
Free Exit Device Magnetic Sensor –
Free Exit Device Photo Eye –
Card Reader -
Single Button Station –
Key Switch –
Seven-Day Timer –
Long Range Receiver and Transmitter -
Security Accessories
Magnetic Lock –
Solenoid Lock –
Stone Lock -
Perimeter Security Proximity Sensor –
Other Accessories
3 Button Station –
Gate Open Indicator –
Gate In Motion Indicator Visual –
Gate In Motion Indicator Audible –