INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 93)

Web Managed GbE Switch
93
The following table describes the labels on this screen.
LABEL DESCRIPTION
User name Enter your user name for new account.
Password Type Select password type for new account:
 Clear Text: Password without encryption.
 Encrypted: Password with encryption.
 No Password: No password for new account.
Password If the password type is other than “No Password,” the password must be
specified.
Retype Password Retype the password to make sure the password is exactly what you
typed before in the “Password” field.
Privilege Type Select a privilege level for new account:
 Admin: Allow to make changes in switch settings.
 User: See switch settings only. Do not allow changes.
Apply Click Apply to save your changes to the switch.
Modify Click Delete to modify any configuration.
3.9.5 Enable Password
This page allows the user to modify the enable password. In the command line interface, the user
can usethe “enable” command to change the privilege level to “Admin.” After the “enable”
command is issued, the user needs to type the enable password to change the privilege level.
Click Maintenance > Enable Password in the navigation panel to display the screen shown
below.
Note: It is highly recommended that you change the default password.