INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 27)

Web Managed GbE Switch
27
The following table describes the labels on this screen.
LABEL DESCRIPTION
Port
Select the port number to show or clear dynamic MAC entries. If not
selecting any port, VLAN or MAC address, the whole dynamic MAC table
will be displayed or cleared.
VLAN
This is the VLAN group to which the MAC address belongs. Select the
VLAN to show or clear dynamic MAC entries. If not selecting any port,
VLAN or MAC address, the whole dynamic MAC table will be displayed or
cleared.
MAC Address
This field displays the MAC address that will be forwarded. Select the MAC
address to show or clear dynamic MAC entries. If not selecting any port,
VLAN or MAC address, the whole dynamic MAC table will be displayed or
cleared.
View
Click the View button to display the logs according to the criteria specified
in the fields above.
Clear
Click this button to remove any dynamically learned MAC address
forwarding entries.
Type
This shows whether the MAC address is Dynamic (learned by the Switch)
or Static Unicast (manually entered in the Static MAC Forwarding
screen).
Port This field displays the port where the MAC address will be forwarded.
Add to Static
MAC table
Click this button to add any port into the static MAC table.
3.1.5.2 Static MAC
Click Status > MAC Address Table > Static MAC in the navigation panel to bring up the screen
shown below.
The following table describes the labels on this screen.