INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 87)

Web Managed GbE Switch
87
Severity
Select the severity level(s) of the log entries you want to display. The
possible severity levels are:
 Error - to record system failures, such as events that will cause the
switch to malfunction and events such as invalid user input in the
Web configurator.
 Warning - to record non-critical errors on the Switch. The Switch will
continue to function when warnings are recorded.
 Info - to record regular system events, such as configuration changes or
logins.
 Debug - to record events that can be helpful for engineering debugging
of the switch’s function. This field is not recommended for tracking,
as it creates many messages not helpful to typical users.
 Notice- to record errors that need attention.
Apply Click Apply to save your changes to the switch.
Status It displays the status of local log settings.
Server
Information
It displays the server information.
Severity It displays the severity status.
Action It displays the action status.
3.8.4 Factory Default
Follow the steps below to restore the switch to the factory defaults.
1. Click Diagnostics -> Factory Default to view the screen shown below.
2. Click the Restore button and the confirm interface displays.
3. Click OK to restore all switch configurations to the factory defaults and the switch will reboot.