INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 34)

Web Managed GbE Switch
34
(a) Destination port: Theoretically, it’s possible to set more than one destination port in a network.
Actually, the port mirroring function will lower the network throughput; therefore, it’s recommended
to set “only one” destination port in a network.
(b) Mirroring Port: (1)RX: means copy the incoming packets of the selected source port to the
selected destination port. (2)TX: means copy the outgoing packets of the selected source port to
the selected destination port. (3)Rx & Tx: means the combination of Rx and Tx.
(c) Source port: the traffic source that will be copied to the destination port.
3.3.3 Trunk
3.3.3.1 Trunk Group
Click Switching> Trunk > Trunk Group in the navigation panel to view the screen shown below.