INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 91)

Web Managed GbE Switch
91
The following table describes the labels on this screen.
LABEL DESCRIPTION
Upgrade
Method
Select the upgrade method:
 TFTP: Use TFTP to upgrade.
 HTTP: Use HTTP to upgrade.
Server IP
IP address of the TFTP server. If the TFTP upgrade method is selected, the
IP address of the TFTP server must be assigned.
File Name
Firmware image or configuration file name on remote TFTP server. If the
TFTP upgrade method is selected, the file name must be specified.
Browse File
If the HTTP upgrade method is selected, the browse file field allows you to
select any file on the host operating system.
Upgrade
Type
Select upgrade type:
 Image: Firmware image of current system.
 Configuration: Configuration file.
Upgrade
Click Upgrade to update the file specified above and install the new
firmware.
3.9.3 Configuration Manager
This page allows the user to save running configurations to any file specified by pushing the “Save
Configuration” button. Click “Set Startup” to select any existing configuration file as the startup
configuration. The “Delete” button allows the user to delete the selected configuration file.
Click Maintenance > Configuration Manager to view the screen shown below.
Configuration Manager Page