Web managed gbe switch, 3 logging out of the web configurator – INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual User Manual
Page 16
Web Managed GbE Switch
16
QoS Remarking Status
This link takes you to a screen where you can assign a QoS
remarking status to packets based on the ingress (incoming)
port of the packet.
QoS Remarking Table
This link takes you to a screen where you can assign a QoS
remarking table to packets based on the ingress (incoming)
port of the packet.
Management
SNMP
This link takes you to a screen where you can set and revise
the SNMP.
Diagnostics
Ping Test
This link takes you to a screen where you can do Ping test.
Ping6 Test
This link takes you to a screen where you can do Ping6 test.
Log Setting
This link takes you to a screen where you can configure log
settings.
Factory Default
This link takes you back to the factory default configuration.
Reboot Switch
This link takes you to a screen where you can reboot the
switch.
Maintenance
Backup Manager
This link takes you to a screen where you can back up the
settings you have made.
Upgrade Manager
This link takes you to a screen where you can upgrade the
switch settings.
Configuration Manager
This link takes you to a screen where you can save all the
configurations you have made to the switch.
Account Manager
This link takes you to a screen where you can change the
Web configurator login account.
Enable Password
This link takes you to a screen where you can change the
login password.
2.3 Logging Out of the Web Configurator
Click Logout in the navigation panel to exit the Web configurator. You have to log in with your
password again after you log out. This is recommended after you finish a management session for
security reasons.