INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 29)

Web Managed GbE Switch
29
The screen shot shows sample data. The actual values may differ.
The following table describes the labels on this screen.
LABEL DESCRIPTION
Mode Select Static from the drop-down box if you don’t have a DHCP server or if
you wish to assign static IP address information to the switch. You need to fill
in the following fields when you select this option.
Select the DHCP option if you have a DHCP server that can assign the switch
an IP address, a subnet mask and a gateway IP address automatically.
IP Address Enter the IP address of your switch in dotted decimal notation; for example,
192.168.2.1. If static mode is enabled, enter the IP address in this field.
Subnet Mask Enter the IP subnet mask of your switch in dotted decimal notation; for
example, 255.255.255.0. If static mode is enabled, enter the subnet mask in
this field.
Gateway Enter the IP address of the gateway in dotted decimal notation. If static mode
is enabled, enter the gateway address in this field.
Apply Click Apply to save your changes to the switch.