INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 86)

Web Managed GbE Switch
86
continue to function when warnings are recorded.
 Info - to record regular system events, such as configuration changes or
logins.
 Debug - to record events that can be helpful for engineering debugging
of the switch’s function. This field is not recommended for tracking,
as it creates many messages not helpful to typical users.
 Notice- to record errors that need attention.
Apply Click Apply to save your changes to the switch.
Status It displays the status of local log settings.
Target It displays the target you’ve chosen.
Severity It displays the severity status.
Action
Click enable to enable this function.
Click disable to disable this function.
3.8.3.2 Remote Log
Click Diagnostics > Log Setting > Remote Log to view the screen shown below.
The following table describes the labels on this screen.
LABEL DESCRIPTION
Server Index
Select the index of the remote log server. System supports four remote log
servers. When a server is set and enabled, log messages will send to this
server.
Server IP The IP address of the remote log server.
Server Port Enter a number between 1 and 65535 as the server port.