INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 74)

Web Managed GbE Switch
74
The following table describes the labels in this screen.
LABEL DESCRIPTION
802.1 p
Select the 802.1p value to mapping to the priority and drop precedence.
The 802.1p range is 0 to 7.
Priority
Select the IEEE 802.1p priority you want to assign to the packets coming
into the switch on the ports specified in the port field. The priority range is
0 to 7.
Apply Click Apply to save your changes to the switch.
802.1 p
This field displays the 802.1p priority level which you’ve choosed..
Priority
This field indicates what IEEE 802.1p priority is assigned to the incoming
packets from the port.
3.6.3 DSCP - based Priority
You can configure the switch to assign an IEEE 802.1p priority to packets coming into the switch
with DSCPs assigned to them.
Click QoS > DSCP-based Priority to display the screen shown below.