INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 75)

Web Managed GbE Switch
75
The following table describes the labels on this screen.
LABEL DESCRIPTION
DSCP
Select the DSCP value IRUZKLFK\RXZDQWWRGHILQHDSULRULW\YDOXH.
The DSCP range is 0 to 63.
Priority Select the priority value that the DSCP is mapped to. The priority range
is 0 to 7.
Apply
Click Apply to save your changes to the switch.
DSCP
This field displays the DSCP classification identification numbers.
Priority This field displays the DSCP classification identification number’s IEEE
802.1p Priority.
3.6.4 Priority to Queue Mapping
Click QoS > Priority to Queue Mapping to display the screen as shown next.
IEEE 802.1p defines up to eight separate traffic types by inserting a tag into a MAC-layer frame
that contains bits to define the class of service. Frames without an explicit priority tag are given the
default priority of the ingress port. Use the next screen to configure the priority level-to-physical-
queue mapping.
The Switch has eight physical queues that you can map to the eight priority levels. On the Switch,