Web managed gbe switch, 2 ping6 test – INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual User Manual
Page 84

Web Managed GbE Switch
84
Count
It displays how many times to send ping request packet.
Enter a number between 1 and 5 as the count. The default configuration
is 1.
Interval
It displays time interval between each ping request packet.
Enter a number between 1 and 5 as the interval. The default
configuration is 1.
Size
It displays the size of ping packet.
Enter a number between 0 and 5120 as the size. The default
configuration is 0.
Ping Results
After a ping is finished, results will show in this field.
Apply
Click Apply to save your changes to the switch.
3.8.2 Ping6 Test
The following table describes the labels on this screen.
LABEL
DESCRIPTION
IPv6 Address
Enter the IPv6 addresses of the test destination.
Count
It displays how many times to send ping request packet.
Enter a number between 1 and 5 as the count. The default
configuration is 1.
Interval
It displays time interval between each ping request packet.
Enter a number between 1 and 5 as the interval. The default