Clear-Com FreeSpeak Antenna Splitter - Manual (Page 82)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
5 - 1 2
2. Select the beltpack to which the labels are to be assigned. The
BELTPACK menu is displayed.
3. Select KEYS. The KEY EDITING screen appears, as shown in
Figure 5-22.
Figure 5-22: Assign communication routes (“labels”) to a beltpack key
Up to six communications routes (“labels”) can be assigned to a
FreeSpeak beltpack depending on the number of key pages
available on the beltpack:
• Page 1 of the beltpack’s display screen shows the first
assignments for the Talk A and Talk B knobs (2 assignments).
• Page two shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
• Page three shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
Figure 5-23 shows how the front-panel screen on a beltpack
displays its six communications routes.
Figure 5-23: Beltpack Display
4. Select the beltpack key to assign a communication route to. For this
example, it is the beltpack’s Talk A key, page 1.
SELECT KEY TO BE EDITED ON BP#1 (BPK01)
Pg1-2
SM1-A Pg2-1
A1-A Pg2-2
LTG1A Pg3-1
SM2-A Pg3-2
AUD-A Pg1-1
STG-A
BACK