Clear-Com FreeSpeak Antenna Splitter - Manual (Page 36)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
2 - 4
OVERVIEW OF BELTPACK OPERATION
Figure 2-3: Overview of Beltpack Operation
ASSIGNING LABELS TO THE FREESPEAK
BELTPACKS
To assign a name (“label”) to FreeSpeak beltpack #1
1. From the basestation’s front-panel display, use the setup/enter knob
to select BELTPACKS, then BPK01, and then LABEL.
Rotate the setup/enter knob until the desired item is highlighted.
Press the knob in to select the item.
2. Rotate the setup/enter knob again to select the alphanumeric
character to be edited, then push the setup/enter knob in to select