Clear-Com FreeSpeak Antenna Splitter - Manual (Page 110)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
6 - 1 0
REMOVING REGISTERED BELTPACKS FROM THE
BASESTATION
Beltpacks can be removed from the basestation and new ones
substituted with the FreeSpeak Toolkit program. Refer to the chapter
“FreeSpeak Configuration Editor” for more information.
ACCESSING THE TALK/LISTEN PATHS ON
THE FREESPEAK BELTPACK
The user can access up to six communications routes with a beltpack.
A route is activated by pressing the appropriate talk button (A or B)
when the desired label appears on the beltpack’s display.
• Page 1 of the beltpack’s display screen shows the assignments for
the Talk A and Talk B buttons (2 assignments).
• Page two shows the next set of assignments for the Talk A and
Talk B buttons (2 assignments).
• Page three shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
Figure 6-7 shows how the front-panel screen on a beltpack displays
its six communications routes.
Figure 6-7: How the beltpack displays its six communication routes
The case of a label on the beltpack indicates its assignment type:
• All uppercase - Talk