Clear-Com FreeSpeak Antenna Splitter - Manual (Page 59)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 4 - 1 1
3. Scroll to CALLS and press to select.
4. Select the port or group to create an audio path to and press to
select. Doing so creates a route to the selected destination—this
port or group can now hear the activity on the party line. (Note: this
option can also be set to NONE.)
5. Once the changes have been saved, the route will be reinstated on
power up.
Note: Call signalling is not currently supported on 4-wire
connections.
In the GROUPS menu, the 4-wire port can be assigned as a member
of any of the groups, as desired.
4-Wire Pinout
The pinout for the RJ-45 4-wire port is shown in Table 4-2.
Figure 4-5: Front View of RJ-45 Connector
RJ-45 CONNECTOR
AT BASE STATION PORT
8 7 6 5 4 3 2 1