Clear-Com FreeSpeak Antenna Splitter - Manual (Page 31)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 1 - 5
IMPORTANT INSTALLATION INFORMATION
System Password
From release V2.0 onwards FreeSpeak basestations require a
password to be input in order to activate the basestation when it is first
configured. The password requires the unique basestation system ID
and will normally be supplied with the installation CD for a new unit. If
an existing basestation is upgraded the basestation system ID must be
provided before an upgrade CD can be supplied.
Default Map
In V2.0 a default map has been added to help the first time user; the
map is designed to work like a simple party-line system.
Note that the analogue party-line ports are not included in the default
map as they would introduce an echo into the audio.
Figure 1-4: Default Map Loaded
The Figure 1-4 above shows the default map on the configuration
editor; the two WPL (wireless party-lines) are programmed on the first
page and the other page are left un-programmed and will not be shown
on the beltpack.