System features – Clear-Com Tempest900 User Manual
Page 80
74
Tempest®900 2-Channel Wireless Intercom System
System Features
•
All digital, frequency hopping spread spectrum technology - no frequency coordination needed
•
900MHz offers World-Wide operation with no licensing requirements in most world-wide locations
•
Accu Sync™ timing system for improved performance with multiple BaseStations
•
iSelect™ On-Command roaming
•
Two intercom channels and up to 5 full duplex BeltStations per BaseStation in Normal Mode
•
Configure up to 5, 900MHZ BaseStations with 25 full duplex BeltStations in a single system when operating in
Normal Mode
•
An unlimited number of BeltStations per BaseStation in Shared and Split Mode
•
BeltStations can access both intercom channels in “Dual-listen” or “Single-listen” mode
•
Weather resistant BeltStations
•
BeltStations can send and receive “Call Alert” signal from wired intercom systems
•
Silent vibrate mode on BeltStations
•
Both “Stage Announce” and GPO Relay function available for each BeltStation
•
Talk switches can be de-latched via the Mic Kill feature from either the BaseStation or the hardwire intercom
•
Auxiliary audio input and output
•
Program Volume control allows user to set volume of incoming program audio
•
LAN control interface
•
Electret or Dynamic Mic auto select
•
Multiple antenna connection options
•
Compatible with Clear-Com®, RTS®, Telex®, and other 2-Wire and 4-Wire intercom systems