Clear-Com Tempest900 - Manual (Page 24)

18 Tempest®900 2-Channel Wireless Intercom System
6- Local Area Network (LAN) RJ-45 Connector
The Local Area Network (LAN) RJ-45 Connector is used to connect the Tempest BaseStation to a user supplied PC running
Tempest Desktop Configuration (T-Desk) software. The user can then monitor and/or adjust BaseStation and BeltStation
settings via the PC interface. This connection can be made directly or through a Local Area Network (LAN). See the separate
T-Desk User Manual for more information.
7- Relay Connector
The Relay Connector provides access to all of the relay closure contacts for the Tempest BaseStation. There are six
relays including one common Stage Announce relay and five individually assignable relays - one for each of the wireless
BeltStations. See the section on “GPO Relay Contacts.
8- Antenna Connector
The Antenna Connector is used to connect the antenna to the Tempest BaseStation. The Antenna Connector is an RP-TNC
(Reverse Polarized-TNC) connector. Cables used to attach to this Antenna Connector must be properly terminated with
mating RP-TNC connectors and the proper cable type.
9- Remote Transceiver RJ-45 Connector
The Tempest Remote Transceiver RJ-45 connector is used to connect the optional remote transceiver to the Tempest
BaseStation. The remote transceiver can be located up to 1,500 feet from the BaseStation.