Clear-Com Tempest900 - Manual (Page 29)

23 Tempest®900 2-Channel Wireless Intercom System
BaseStation Setup
Steps to Setup the BaseStation
• Choose a location for the BaseStation
• Choose an antenna location and configuration
• Maximize performance
• Configure operation features
• Set Network Number and Lockout Key
» Name each BaseStation and BeltStation (optional, but encouraged)
» Set Static or Dynamic Display
• Configure optional features
Choose a Location
A Tempest BaseStation mounted in an equipment rack with optional cables and mounting hardware.
Tempest is a radio system. Choosing a location for your Tempest BaseStation and the associated antenna is one of the most
important factors to ensure proper system operation and achieve maximum operational range. As covered in the General
Information and Theory of Operation section of this manual, broadcasting and receiving RF signals can be greatly affected by
physical and electromagnetic barriers.
Following the guidelines below for selecting a suitable BaseStation and antenna location will help to ensure that your
system operates properly and achieves the maximum possible operational range.
See the Antenna Configuration section of this manual for details about recommended cable type and other important
information about connecting the antenna to the Tempest BaseStation.
BaseStation Location
The location of the BaseStation is important, but it is the location of the antenna that will ensure maximum system
performance and operational range. Whenever possible, locate the BaseStation in close proximity to the desired coverage
area. If this is not possible consider using the optional Remote Transceiver to achieve optimal antenna positioning. It is
not recommended to use RF coaxial cable lengths longer than 25 feet to remote the antenna, as this will degrade system
performance and operational range.
• The BaseStation must have a source of electric power available. This can be either AC or battery (DC) power.
• The front panel of the BaseStation must be accessible for configuration.
• The front panel may be used as a communication portal.
• The rear panel must be accessed for making wired system connections.
• The Tempest BaseStation should be in a location that has adequate ventilation and is not subject to extreme
temperatures and humidity.
• Avoid areas subject to water or rain.
• Always use a stable and secure platform or rack mount system.