Clear-Com Tempest900 - Manual (Page 79)

73 Tempest®900 2-Channel Wireless Intercom System
Tempest Part Numbers
Model Number (Clear-Com Part Number)
Description
Tempest® 900 MHz Series BaseStations
TMB44509INCC (CM-944)
Tempest® 900 MHz 4 channel, full feature base station. Features two RP-TNC RF antenna
ports, Remote Transceiver port, 2-wire, 4-wire, Stage Out, Aux IN, Aux OUT, relay cluster,
Sync IN, Sync OUT, USB, LAN, Belt Prog port and AC & DC power inputs. Supports up to 5
wireless BeltStations (in Normal Mode) and an unlimited number of Shared BeltStations.
Comes with AC power cord, USB cable, 1/8” stereo mini programming cable, whip antenna
and T-Desk software.
TMB22509INCC (CM-922)
Tempest® 900 MHz 2 channel, full feature base station. Features one RP-TNC RF antenna
ports, Remote Transceiver port, 2-wire, 4-wire, Stage Out, Aux IN, Aux OUT, relay cluster,
Sync IN, Sync OUT, USB, LAN, Belt Prog port and AC & DC power inputs. Supports up to 5
wireless BeltStations (in Normal Mode) and an unlimited number of Shared BeltStations.
Comes with AC power cord, USB cable, 1/8” stereo mini programming cable, whip antenna
and T-Desk software.
Tempest® 900 MHz Series BeltStations
TMR42509INCC (CP-942)
Tempest® 900 MHz 4 channel, dual-listen wireless BeltStations. Features stage announce,
call, remote mic kill, vibrate alert, internal antenna, 4-PIN male XLR, program port and USB
connector. Comes with 2000mAh Li-Poly rechargeable battery and wall charger.
TMR22509INCC (CP-922)
Tempest® 900 MHz 2 channel, dual-listen wireless BeltStations. Features stage announce,
call, remote mic kill, vibrate alert, internal antenna, 4-PIN male XLR, program port and USB
connector. Comes with 2000mAh Li-Poly rechargeable battery and wall charger.
Tempest ® 900 MHz Series Transceivers
TMA-RMTCVR-02 (CCT-9RT)
Tempest FX® 900 MHz Remote Transceiver. Allows remote transmit/receive function with
no loss of RF signal. Connects to compatible BaseStation via standard CAT-5 RJ45 cable.
Power is provided down the CAT-5 cable for up to 1500 feet (450 meters). Comes with 15 ft
(4.5 m) CAT-5 cable, mounting bracket assembly and whip antenna.
Tempest® Series 5-Bay Battery Chargers
TMA-BCHRG-05A (T-BC5) 5-bay battery charger for charging Lithium-Polymer batteries outside of the BeltStation
Rechargeable Li-Poly Batteries
TMA-BAT-02 (T-LP1) Tempest® 3.6VDC, 2000mAh rechargable Lithium-Polimer battery
Tempest® Accessories
00001693 2 dBi Omni-Directional whip antenna with RP-TNC connector
BOG-C1575B
Bogen “C” clamp for use with Mounting Bracket TMA-DMB5/8. Also attaches directly to
Remote Transceiver using two user supplied #8-32 X 3/8” Phillips Flat Head screws. Bogen
number C1575B
PC-ANTCABLE-20 RP-TNC to N coaxial low loss RF cable 20 feet in length
PC-ANTCABLE-10 RP-TNC to N coaxial RF cable 10 feet in length
PC-ANTCABLE RP-TNC to N coaxial RF cable 4 feet in length
TMA-USBCHRG Tempest® 5 VDC Wall charger with Mini-USB connector, US blades
TMA-USBCHRG-02 Tempest® 5 VDC Wall charger with Mini-USB connector, Multi-blade
00001398 USB to Mini-USB cable 6 foot in length
CX-WB-CAB15 RJ45 Ethernet cable 15 foot in length
00001390 USB A to USB B cable 6 foot length
CX-PRGM-CAB 1/8” to 1/8” stereo mini pairing cable 6 foot in length
00001700 Tempest® BeltStation battery cover