Clear-Com Tempest900 - Manual (Page 78)

72 Tempest®900 2-Channel Wireless Intercom System
Default Settings
BaseStation Defaults BeltStation Defaults
Headset Sidetone: -18 dB Headset Sidetone: -18 dB
Headset MIC gain: +6 dB / +22 dB Headset MIC gain: +6 dB / +22 dB
• Electret: +6 dB • Electret: +6 dB
• Dynamic: +22 dB • Dynamic: +22 dB
LCD Contrast: 30 Low Battery Alert: Enable
LCD Backlight Brightness: 80 LCD Back Light: Enable
LED Brightness: 40 Talk LED: Medium
Headset Talk Button: Latch Talk Buttons: Latch
Set Base as Master: OFF Security: Disable
Front Panel Lock: OFF Lock Keys: OFF
Wired intercom levels In/Out: Volume Limits:
• 2-Wire: -1.5 dB (IN) / -1.5 dB (OUT) • Min Volume: OFF (0)
• 4-Wire: -9 dB (IN) / +3 dB (OUT) • Max Volume: 25
Aux Out: OFF Call Alert: Both
S/A Audio: -12 dB Call Button: Enable
S/A Relay: Enable Select Relay: None selected
Security: Disable Relay Button: None selected
Frequency Band: 902-928Mhz S/A Audio: Momentary
Display Slot Assignment: Dynamic S/A Relay: Enable
TCP/IP Mode: DHCP Client Wireless ISO: Enable
Echo Cancellation: ON Volume Press: Disable
Mic Kill Settings: Enable All Talk Tones: Enable
Call Settings: Enable All Delay Switch: Disable
Program Volume: Off