Fluid Components International CMB - Manual (Page 51)

13.1.1 Mass flow
After selecting the Mass flow function, the following will be displayed:
Mass flow
XXX.X kg/h
The LCD shows the current mass flow. The operator can define the display unit in the FLOW functional
class using the Mass flow QM unit function.
13.1.2 Volume flow
After selecting the Volume flow function, the following will be displayed:
Volume flow
XXX.X m³/h
Volume flow can only be displayed if density measurement has been calibrated and activated. Otherwise,
an error message is displayed. The operator can define the display unit in the FLOW functional class
using the Volume flow QV unit function.
13.1.3 Counter forward
After selecting the Counter forward function, the current reading of the forward flow counter will be dis-
played.
Counter forward
XXXXXXXX.XX kg
The operator can define the display unit in the COUNTERS functional class using the Unit of counters
function.
13.1.4 Counter reverse
After selecting the Counter reverse function, the current reading of the reverse flow counter will be dis-
played.
Counter reverse
XXXXXXXX.XX kg
The operator can define the display unit in the COUNTERS functional class using the Unit of counters
function.
CMB & CT OPERATING MANUAL
Part No 06EN003384 rev. 1.6 Page 51 of 106