Fluid Components International CMB - Manual (Page 36)

10.3 Process conditions
10.3.1 Fluid temperature
− 40 °C to + 260 °C (-40 °F to 500 °F)
The data sheet/rating plate of the connected transmitter must be observed.
10.3.2 Physical state
Liquid product (maximum density 2 kg/l (125lb/ft³))
Gaseous product (minimum density 0.002 kg/l in operating state)
10.3.3 Viscosity
0.3 to 50,000 mPas (0.3 to 50,000cP)
The data sheet of the connected transmitter must be observed.
10.3.4 Fluid temperature limit
260 °C (500 °F)
The data sheet of the connected transmitter must be observed.
10.3.5 Flow rate limit
See sensor data sheet in Section 3.4.2 CMB flow ranges on page 15.
10.3.6 Pressure loss
See sensor data sheet in Section 3.4.5 Pressure loss CMB on page 17.
Page 36 of 106
CMB & CT OPERATING MANUAL