Steps prior to operation – Fluid Components International CMB User Manual
Page 10

1. Steps prior to operation
It is essential that you read these operating instructions before installing and operat-
ing the device. The device is to be installed and serviced by a qualified technician
only. The CT transmitter is to be used exclusively to measure mass and volume
flow, as well as liquid and gas density and temperature, in conjunction with a CMM,
CMB or CMU sensor.
Downloading of the present document from our web site
and printing out this document is allowed only for purposes of using our mass flow-
meters. All rights reserved. No instructions, wiring diagrams, and/or supplied software, or any portion
thereof, may be produced, stored, in a retrieval system or transmitted by any means, electronic, me-
chanical, photocopying or otherwise, without the prior written permission of FCI.
Although the materials in the present document were prepared with extreme care, errors cannot be ruled
out. Hence, neither the company, the programmer nor the author can be held legally or otherwise re-
sponsible for any erroneous information and/or any loss or damage arising from the use of the informa-
tion enclosed.
FCI extends no express or implied warranty in regard to the applicability of the present document for any
purpose other than that described.
We plan to optimize and improve the products described and in so doing will incorporate not only our own
ideas but also, and in particular, any suggestions for improvement made by our customers. If you feel that
there is any way in which our products could be improved, please send your suggestions to the following
address:
FCI Fluid Components International LLC
Coriolis Product Managaer
1755 La Costa Meadows Drive
San Marcos, CA 92078
or:
via fax:
760 - 736 - 6250
via E-mail:
We reserve the right to change the technical data in this manual in light of any technical pro-
gress that might be made. For updates regarding this product, visit our website at
area. For factory direct questions, contact us at
Page 10 of 106
CMB & CT OPERATING MANUAL